list of errors, messages and problems and solution

error problem thermomix tm31 2020

The Thermomix TM31 has been and is one of the best-selling models by Vorwerk, the company behind the food processor. By market share, it is also one of the models that has reported the greatest number of errors throughout its short history. As usual, errors are emitted through the robot’s screen in the form of messages and codes. On this occasion we have compiled with the list of errors and messages of the Thermomix TM31, as well as the solution to each of the device’s problems.

Mambo Cecotec 8090 and 9090: list of errors and problems and their solution

Solution to Error – of the Thermomix TM31

We have removed the food from the balance just at the time of measurement. The solution is to set the balance to 0 to re-weigh the food.

Solution to Error 22 of the Thermomix TM31

It is usually related to the robot power supply system. If the message appears repeatedly we will have to go to customer service to proceed with its repair.

Solution to Error 23 of the Thermomix TM31

It is related to a problem with the Thermomix container cup. The solution goes through disconnect the plug and reconnect it to force a restart of the system. It is also recommended to clean the bowl contacts correctly.

If the message persists, we will have to repair the glass or replace it with a new one.

Solution to Error 26 and Error 32 of the Thermomix TM31

It appears when the voltage of the electric current is weak, either due to lack of power or because the wall socket is faulty. If the message appears repeatedly we will have to repair the robot in the Vorwerk technical service.

Solution to Error 27, Error 28, Error 30 and Error 31 of the Thermomix TM31

This is a hardware error in the Thermomix TM31. The only solution is repair the robot in the technical service if the messages appear repeatedly, either with different codes or with the same error code.

Solution to Error 34 of the Thermomix TM31

Indicates that the robot motor is overloaded. It may be due to a excess in the amount of food stored in the container glass. It can also be related to the blockage of the blade by food debris or consistent food pieces. The solution is so simple to reduce the amount of food in the glass or clean the blade of food debris.

Solution to Error 35, Error 36 and Error 37 of the Thermomix TM31

If the message appears frequently we will have to take repair the robot to the official technical service of Vorwerk.

Solution to Error 38 and Error 39 of the Thermomix TM31

It is usually related to a robot hardware problem. We can test disconnect and connect the plug to force its restart. If the messages persist, we will have to contact the official technical service.

Solution to Error 52 of the Thermomix TM31

This is a problem related to the container cup. It usually appears when a very cold or frozen food has been put into the glass. If we have kept the glass in the fridge, the error is likely to persist until the temperature rises to the minimum limit supported by the robot.

What the brand recommends is wash the glass with hot water and process frozen or very cold food quickly to prevent the glass temperature from falling. We can also try cleaning the contacts of the glass to remove any element that hinders the processing of food.

Solution to Error 53 of the Thermomix TM31

This problem is derived from a bad bad connection with the socket contacts. To make the warning disappear we will have to clean the contacts of the glass.

Solution to Error 55 of the Thermomix TM31

Problems with the balance of the robot. If the message appears repeatedly we will have to use Vorwerk service.

Solution to Error 58, Error 59, Error 60 and Error 61 of the Thermomix TM31

This is a general hardware problem whose only solution is to contact Thermomix technical service.

Solution to Error 67 of the Thermomix TM31

Robot balance failure. It has no solution, so we will have to contact technical service if the message persists during several days.

Solution to Error 68 of the Thermomix TM31

It is related to a general hardware problem. We will have to go to the company’s technical service to find a custom solution.

Solution to Error 69 of the Thermomix TM31

It usually appears when the food processor experiences overheating problems. If the message appears repeatedly we will have to call the technical service.

Solution to Error 70 of the Thermomix TM31

This is a general hardware problem with the Thermomix TM31. Vorwerk recommends disconnect and reconnect the plug to force restart the device.

Solution to Error 72 of the Thermomix TM31

It corresponds to a general problem with the robot components. We will have to go to the technical service to give you a solution.

Solution to Error LOAD of the Thermomix TM31

The glass is overloaded or overheated. We will have to wait for the engine to cool down or reduce the amount of food stored in the glass.

Solution to OPEN Error of the Thermomix TM31

The robot speed selector is not in the open position. To remove the notice tendoars we turn the selector to the OPEN position.

Solution to Error 8888 of the Thermomix TM31

The weight value recorded by the balance is outside the range allowed by the system. The brand recommends set the balance to 0 and then reduce the weight of the food. It is also recommended to check the ones that support the balance.

Solution to OULD Error of Thermomix TM31

A problem very similar to message 8888. The solution is reduce the weight of food and control the feet on the scale. If the problem persists, it is likely that it has been damaged.

Solution to Error 0 of the Thermomix TM31

Same mistake as the previous two. We will have to reduce the weight of the food or check the condition of the feet.





Other news about … Robots

Leave a Reply

Your email address will not be published. Required fields are marked *