Things that affect your Wi-Fi connection the most and how to avoid them

What things affect your Wi-Fi connection the most? It is a question that we have all asked ourselves at some point, and it is perfectly understandable, since this type of Internet connection is affected by multiple external factors that can make it completely useless.

This is due to the very nature of the Wi-Fi connection, which works using donut-shaped radio waves, which are transmitted from a central point, usually the router, to the surrounding devices that are connected to the network (a smartphone, a tablet, a PC, etc.).

The waves should travel a certain distance to reach your destination, and the same happens with the waves that send devices connected to the Internet back to the router. In this two-way communication, external interference may occur, but not all of them affect your Wi-Fi connection equally.

In this article we want to share with you the three things that most affect your Wi-Fi connection, and we will explain how can we avoid them. If you have any questions you can leave it in the comments.

1.-Things that affect your Wi-Fi connection the most: the pladur

These are the three things that affect your Wi-Fi connection the most 30

It is the material that most affects the signal of our Wi-Fi connection. If our home or office uses this construction material and we want to cover large gaps, we will need to resort, almost certainly, to Wi-Fi repeaters, and it may be necessary, in some cases, to opt for PLC devices, especially if we want to reach upper or lower floors optimally.

According to several studies it is estimated that a plasterboard wall can block up to 50% of Wi-Fi signal, which means that it greatly limits its range and can render a Wi-Fi connection unable to travel more than a few meters due to this blocking effect that this material exerts.

How do I solve it?

It’s tricky, but putting the router in a central and elevated position, without obstacles around them, and keep open doors It can make a substantial difference.

two.-Things that affect your Wi-Fi connection the most: some ehousehold appliances

things that affect your Wi-Fi connection the most

As we have said, Wi-Fi works through radio waves, and these can be affected by interference generated by some household appliances, although luckily they are limited, in most cases, to the 2.4 GHz band.

Interference affects stability and signal quality, and when they occur at a considerable level they can completely ruin our Wi-Fi connection.

How do I solve it?

It is much simpler than the previous case. We must place the router following the instructions that we have given you previously, but placing it as far as possible from home appliances that can generate interference.

Use the 5 GHz band It also helps us to solve this problem to a great extent.

3.-Things that affect your Wi-Fi connection the most: Mirrors

These are the three things that affect your Wi-Fi connection the most 33

Some of our readers may have been surprised, but it’s true, the mirrors are one of the things that most affect to your Wi-Fi connection, and the reason is very simple.

Mirrors reflect light, and also reflect the wireless signal from our router, which generates a rebound effect which can cause the emitted signal to go back in the opposite direction and “collide” with the new emissions from the router. You can imagine the impact this has on our Wi-Fi connection.

How do I solve it?

It is very easy, just avoid placing the router near mirrors. In case there is no other option than to place it in a room with mirrors, we must place it as far away from them as possible. Keep in mind that the larger the mirror, and the closer the router is to it, the greater its impact on our Wi-Fi connection.

Content provided by AVM FRITZ!

Leave a Reply

Your email address will not be published. Required fields are marked *